Anodised Gold door handles to suit double glazed doors with Ferco multipoint locks with 70mm centres.
Also available in White, Anodised Silver and Black, click here to see the other colours
- Distance between screws: 180mm
- Handle to barrel centre: 70mm
- Handle total length: 205mm
- These handles are non-handed so will work on left or right handed doors
- These handles use 7mm door spindles
1 x internal handle, 1 x external handle, 1 x spindle and fixing screws,
** Care should be taken not to confuse these handles with the Fullex system which has a centre of 68mm.**
Has your door handle gone floppy? This could be the Ferco multipoint lock rather than the handle.
Call us on 01204 652211 for advice or email us on email@example.com
Door Handle Measuring Guide
Simple steps to help you choose the Correct Door Handle for your Door
First you need to measure between the centre of the handle (the bit that you pull down) and the centre of the keyhole. If you look at the picture to the left this measurement is referred to as A This size is set so make sure you measure carefully. This size is known as the handle CENTRES or PZ. You will find this size as part of the description of all the door handles on our site.
The next size you need to take is the screw centres (referred to as B). To do this you measure from the centre of the top screw to the centre of the bottom screw (some handles have screws under the handle or over the handle.) Once you have these sizes (write them down) you can browse our site for handles that you need.
To make shopping easier now you are armed with the correct sizes CLICK our very simple Door Handle Calculator below to take you to exactly what you need.