68mm UPVC Door Handles (to suit Fullex system), 68mm centre, 215mm screws, Lever/Pad In White

Lever/Pad handles to suit Fullex multipoint locks with 68mm centres.

This handle type was used widely on the old Anglian double glazing UPVC doors, although this system can be found in other doors.

Colours: Available in White or Anodised Gold

Measurements

• Distance between screws: 215mm
• Handle to barrel centre: 68mm
• Handle total length: 245mm
• These handles are non-handed so will work on left or right handed doors
• NOTE: these handles come with a single spindle. Split spindle operation will require the retention and re-use of existing spindles  If you need a split spindle then click here
  

Contents: 

              1 x internal handle, 1 x external pad handle, 1 x spindle and fixing screws, 2 spring cartridges

Care should be taken not to confuse these handles with the Ferco system which has a centre of 70mm.

 If you're sure what door handle you need call and speak to us on 01204 652211

The modern handles are less chunky than previous models, and you may also find that older handles have a spring system fixed into the handle where they are separate cartridges in newer handles.

The levers are fixed to the backplate and by design are fully reversible. Fixing lugs are supplied on both backplates for a secure fit.

Aluminium lever and backplate