Loading... Please wait...Call our Sales Line : 01204 652211 or 01204 655890
These are Lever/Pad handles to suit Fullex multipoint locks with 68mm centres.
This handle type was used widely on the old Anglian double glazing UPVC doors, although this system can be found in other doors..
Colours: Available in White or Anodised Gold
Measurements
Distance between screws:215mm
Handle to barrel centre :68mm
Handle total length:245mm
These handles are non-handed so will work on Left or Right handed doors
Contents:
1 x internal handle, 1 x external pad handle, 1 x spindle and fixing screws, 2 spring cartridges
Care should be taken not to confuse these handles with the Ferco system which has a centre of 70mm.
Not sure what door handle you need?
Call us on 01204 652211 for free advice
The modern handles are less chunky than previous models, and you may also find that older handles have a spring system fixed into the handle where they are separate cartridges in newer handles.
The levers are fixed to the backplate and by design are fully reversible. Fixing lugs are supplied on both backplates for a secure fit.
Aluminium lever and backplate
Not sure how to measure your UPVC Door handles? |
![]() |
Measure between the middle of the handle lever and the middle of the cylinder as in the picture above. This size is called the PZ size. This is very important and cannot be changed at all. Once you have that size you can click on the link below that suits your particular PZ size. |