Hoppe
68mm UPVC Door Handles (to suit Fullex system), 68mm centre, 215mm screws, Lever/Pad In Anodised Gold
- SKU:
- DH-68/215-FUL-L/P-AnoGold (5055621408525)
- UPC:
- 5055621408525
- MPN:
- DH-68/215-FUL-L/P
- Availability:
- In Stock
- Weight:
- 805.00 Grams
Description
These are Lever/Pad handles to suit Fullex multipoint locks with 68mm centres.
This handle type was used widely on the old Anglian double glazing UPVC doors, although this system can be found in other doors.
Colours: Available in White or Anodised Gold
Measurements
- Distance between screws: 215mm
- Handle to barrel centre: 68mm
- Handle total length: 245mm
- These handles are non-handed so will work on Left or Right handed doors
- NOTE: these handles come with a single spindle. Split spindle operation will require the retention and re-use of existing spindles. Split spindles are available by clicking here
Contents:
1 x internal handle, 1 x external pad handle, 1 x spindle and fixing screws, 2 spring cartridges
Care should be taken not to confuse these handles with the Ferco system which has a centre of 70mm.
Not sure what door handle you need?
Call us on 01204 652211 for free advice
These modern handles are less chunky than previous models, and you may also find that older handles have a spring system fixed into the handle. The new handles have separate cartridges.
Aluminium lever and backplate
Handle Measuring Guide
Door Handle Measuring Guide
Simple steps to help you choose the Correct Door Handle for your Door
First you need to measure between the centre of the handle (the bit that you pull down) and the centre of the keyhole. If you look at the picture to the left this measurement is referred to as A This size is set so make sure you measure carefully. This size is known as the handle CENTRES or PZ. You will find this size as part of the description of all the door handles on our site.
The next size you need to take is the screw centres (referred to as B). To do this you measure from the centre of the top screw to the centre of the bottom screw (some handles have screws under the handle or over the handle.) Once you have these sizes (write them down) you can browse our site for handles that you need.
To make shopping easier now you are armed with the correct sizes CLICK our very simple Door Handle Calculator below to take you to exactly what you need.
Additional Information
PZ Centre:: |
68mm |
Style: |
Lever Pad |
Colour: |
Satin Gold |
Distance Between Screws: |
215mm |
Length: |
245mm |
Manufacturer: |
Fullex |
Shipping: |
Delivered for just £3.18 |
2 Reviews
-
Upvc door handle
Handles fitted perfectly. The anodized gold finish was very good.
-
Excellent Service & Product
Ordered for a 2000 Anglian Front Door - fitted perfectly. Ordering and delivery excellent. Would use again.