Fab & Fix

Monkey Tail Stay Bar in Hardex Gold - MOVEABLE (Special Order)

(No reviews yet) Write a Review
SKU:
SO-WH-ESP-MnkyStay-MOVE-Gold
UPC:
5055621412201
MPN:
SO-WH-ESP-MnkyStay-MOVE-Gold
Condition:
New
Availability:
PreOrder
  • Monkey Tail Stay Bar in Hardex Gold - MOVEABLE Special Order
  • Monkey Tail Stay Bar in Hardex Gold - MOVEABLE Special Order
  • Monkey Tail Stay Bar in Hardex Gold - MOVEABLE Special Order
  • Monkey Tail Stay Bar in Hardex Gold - MOVEABLE Special Order
£18.49 Inc. VAT
£15.41 Ex. VAT

Description

 

MOVEABLE Monkey Tail Stay Bar in Hardex Gold    

 

Moveable 10" Monkey Tail operating stay bar
- Add a classic finish to a heritage window

 

Non-handed, suitable for both left and right handed windows
- Reduced stock holding

 

Manufactured from die-cast zinc
- Harder wearing finish than traditional wrought ironmongery

 

Peg plates to suit Residence 9 window system
- Suitable for modern flush fitting PVC windows

 

Matching Monkey Tail Handle also available
- Create a perfectly matching heritage window

 

Supplied with colour coordinated screws
- Perfectly matching hardware, even down to the smallest detail

 

PLEASE NOTE - This is a special order product and may take approximately two weeks for delivery

 

 

Technical Specification

 

  • All finishes salt spray tested to 480 hours (BS EN 1670: Class 5)
  • Designed for PVC-U and Timber windows systems

 

 

 

 

 

 

Not sure what window handle you need? 

 

 

Call us on 01204 652211 for free advice

 

What is an espag window handle?

First off lets explain what an espag is. An espagnolette (shortened to espag) locking system is the metal strip which runs up the locking side of a window and moves when the handle is turned. They most often have round studs on them called mushrooms which move up and down (or side to side depending on how your window sits). The mushrooms catch into a metal plate on the window frame called a keep. In the centre of the espag is a gearbox with a square hole in it, the spindle from the handle goes through this hole and when the handle is turned it operates the mechanism.

So the handle which moves an espag mechanism is called an espag window handle.

The double glazing industry has made some parts of an espag handle standard – the fixing holes are always 43mm apart and the spindle is always 7mm wide. The length of the spindle will differ and can range from 10mm up to 40mm. Some companies occasionally used longer spindles but these have been phased out generally.

Just to spoil the descriptions the espag handle also operates other types of systems in upvc windows such as gearboxes and shootbolt systems. But these systems have stuck to the standards and are operated using espag window handles

How To Measure Your Espag Window Handle

Espag Window Handle Measuring Guide 

Simple steps to help you Measure the Spindle for your Window Handle

window-spindle-measuring.jpg

 

Make sure the spindle is pushed right back in to the existing handle and then measure the amount it protrudes from the handle as per (referenced A) the drawing on the left.

If you do not have a handle you can measure the existing Window Bolts you have. The bolts should be the same length as the spindle length that you need but it is not always the case

 

 

DO NOT MEASURE THE SPINDLE TOTAL LENGTH WHILST IT IS OUT OF THE HANDLE,

 

THIS WILL RESULT IN A SPINDLE THAT WILL BE TOO LONG FOR YOUR WINDOW

 

View AllClose

Additional Information

Shipping:
Delivered from just £1.86
View AllClose

0 Reviews

View AllClose