68mm UPVC Door Handles (to suit Fullex system), 68mm centre, 215mm screws, Lever/Lever in Hardex Satin Silver (Fab and Fix)
- SKU:
- DH-68/215-FAB-HardexSilver (5055621408464)
- UPC:
- 5055621408464
- MPN:
- DH-68/215-FAB-HardexSilver
- Availability:
- In Stock
- Shipping:
- Calculated at Checkout
Description
Satin Silver door handles to suit Fullex multipoint locks with 68mm centres. Manufactured by Fab and Fix.
This handle type was used widely on the old Anglian double glazed UPVC doors, although this system can be found in other doors.
Colours:
- Fab and Fix handles available in White, Hardex Gold or Hardex Chrome
- Hoppe handles available in White, Anodised Gold, Anodised Silver, Brass, Bright Chrome or Black.
- Click here to see the alternative colours
Measurements
- Distance between screws: 215mm
- Handle to barrel centre: 68mm
- Handle total length: 245mm
- These handles are non-handed so will work on Left or Right handed doors
- These handles contain a built in spring cartridge
Contents:
1 x internal handle, 1 x external handle, 1 x spindle and fixing screws,
** Care should be taken not to confuse these handles with the Ferco system which has a centre of 70mm **
If you're not sure how to measure your door handles then take a
look at our handle measuring guide by clicking here
or call the Handles and Hinges team on 01204 652211 for advice
Handle Measuring Guide
Door Handle Measuring Guide
Simple steps to help you choose the Correct Door Handle for your Door
First you need to measure between the centre of the handle (the bit that you pull down) and the centre of the keyhole. If you look at the picture to the left this measurement is referred to as A This size is set so make sure you measure carefully. This size is known as the handle CENTRES or PZ. You will find this size as part of the description of all the door handles on our site.
The next size you need to take is the screw centres (referred to as B). To do this you measure from the centre of the top screw to the centre of the bottom screw (some handles have screws under the handle or over the handle.) Once you have these sizes (write them down) you can browse our site for handles that you need.
To make shopping easier now you are armed with the correct sizes CLICK our very simple Door Handle Calculator below to take you to exactly what you need.
Additional Information
PZ Centre:: |
68mm |
Style: |
Lever Lever |
Colour: |
Silver/Grey |
Distance Between Screws: |
215mm |
Length: |
245mm |
Manufacturer: |
Fab and Fix |
Shipping: |
Delivered for just £3.90 |
Related Products
Related Products
300mm White Trickle Vents (internal and external fittings)
Double Glazing Seal / Gasket Sample Pack
