Tilt and Slide Patio Bottom Runners Conversion Kit (Full Kit)

Discontinued by manufacturer

FULL PATIO BOTTOM RUNNERS CONVERSION KIT for tilt and slide patio doors 

This system is ideal if you have a tilt and slide patio door system where the bottom bogeys have either snapped or the spring has broken meaning the door will not stay open whilst running. The system  is a GU set that can be made to  fit most UPVC double glazing patio doors. Our engineer has converted many old systems to work and run like new. The job will take approximately 2-4 hours depending on your DIY abilities.

The system comes complete with two new bogeys and a new bottom rail which will need to be swapped to enable the runners to work smoothly. Also the pack comes with a new bottom cover and new feet caps (the bits that usually break when removing).

**  Please note: there are no fitting instructions with this product due to variations in your existing patio door **

       Could take 4-6 weeks, please call for more details

You will need three pieces of information before ordering:

• Width of door - Only the width of the moving door
  
• Hand of door - to check see the diagram below, viewed from inside.
• Colour required - White or Brown
  

 Please note:Due to this part being special order we do not accept returns on this product. Please choose carefully.**

Sizes

• 720mm - 850mm       
  
• 851mm -1100mm       
  
• 1101mm -1350mm      
  

• 1351mm -1600mm     
  

Conversion kit consists of:

• 2 x bogey runners
• 1 x length of running track (croppable)
• 1 x bottom cover plate
• 2 x foot covers
• 1 x tension rod (croppable)
• 1 x door kick-in guide
• top track (not always needed)
• spare gliders (not always needed)
• 30 x 38mm fixing screws
• 20 x 19mm fixing screws.
• end stop