FULL PATIO BOTTOM RUNNERS CONVERSION KIT for tilt and slide patio doors. This system is ideal if you have a tilt and slide patio door system where the bottom bogies have either snapped or the spring has broken meaning the door will not stay open whilst running. The system  is a GU set that can be made to  fit most UPVC double glazing patio doors. Our engineer has converted many old systems to work and run like new. The job will take approximately 2-4 hours depending on your DIY abilities.

The system comes complete with 2 new bogies and a new bottom rail which will need to be swapped to enable the runners to work smoothly. Also the pack comes with a new bottom cover and new feet caps (the bits that usually break when removing).

**  Please note: there are no fitting instructions with this product due to variations in your existing patio door **

You will need 3 pieces of information before ordering:

                    Width of door - Only the width of the moving door

                    Hand of door - to check see the diagram below, viewed fron inside.

                    Colour required - White or Brown

Sizes and pricing

       WHITE - to suit door width:720mm- 850mm          £165.00

       WHITE - to suit door width:851mm-1100mm         £178.00

       WHITE - to suit door width:1101mm-1350mm       £191.00

       WHITE - to suit door width:1351mm-1600mm       £197.00

       BROWN- to suit door width:720mm- 850mm         £173.76

       BROWN- to suit door width:851mm-1100mm        £183.76

       BROWN- to suit door width:1101mm-1350mm      £198.16

       BROWN- to suit door width:1351mm-1600mm       £208.91

Conversion kit consists of:

• 2 x bogey runners
• 1 x length of running track (croppable)
• 1 x bottom cover plate
• 2 x foot covers
• 1 x tension rod (croppable)
• 1 x door kick-in guide
• top track (not always needed)
• spare gliders (not always needed)
• 30 x 38mm fixing screws
• 20 x 19mm fixing screws.
• end stop