Hoppe 48mm UPVC Door Handles, 48mm centre, 215 screws, Lever/Lever in White
- SKU:
- DH-48/215-HOP-White (HOP48LLW) (5055621408426)
- UPC:
- 5055621408426
- MPN:
- DH-48/215-HOP-White
- Condition:
- New
- Availability:
- In Stock
- Shipping:
- Calculated at Checkout
Description
Handles to suit aluminium and upvc doors using multipoint locks with 48mm PZ centres.
The range of double glazing handles for the 48mm system has been reduced and these are now the only handles available.
It may mean that you will need to redrill to make the screws suit - care must always be taken to check that the gearbox will not be damaged before drilling into a door.
Also Available in Anodised Gold and Anodised Silver, click here to see other colours
Measurements
- Distance between screws: 215mm
- Handle to barrel centre: 48mm
- Handle total length: 235mm
- These handles are non-handed so will work on left or right handed doors
Contents:
1 x internal handle, 1 x external handle, 1 x spindle and fixing screws
Not sure if theses door handles are the ones you need?
Call us on 01204 652211 or email on office@handlesandhinges.co.uk for advice
Handle Measuring Guide
Door Handle Measuring Guide
Simple steps to help you choose the Correct Door Handle for your Door
First you need to measure between the centre of the handle (the bit that you pull down) and the centre of the keyhole. If you look at the picture to the left this measurement is referred to as A This size is set so make sure you measure carefully. This size is known as the handle CENTRES or PZ. You will find this size as part of the description of all the door handles on our site.
The next size you need to take is the screw centres (referred to as B). To do this you measure from the centre of the top screw to the centre of the bottom screw (some handles have screws under the handle or over the handle.) Once you have these sizes (write them down) you can browse our site for handles that you need.
To make shopping easier now you are armed with the correct sizes CLICK our very simple Door Handle Calculator below to take you to exactly what you need.
Additional Information
PZ Centre:: |
48mm |
Style: |
Lever Lever |
Colour: |
White |
Distance Between Screws: |
215mm |
Length: |
235mm |
Manufacturer: |
Hoppe |
Shipping: |
Delivered for just £3.18 |
1 Review
-
Finally some handles that fit
I have been looking everywhere for handles with a 48mm centre and was told I needed a new door. Thanks to Dylan at Handles and Hinges this was sorted for a tenth of the price
Related Products
Related Products
Hoppe 48mm UPVC Door Handles, 48mm centre, 215 screws, Lever/Lever in Anodised Silver
Hoppe 48mm UPVC Door Handles, 48mm centre, 215 screws, Lever/Lever in Anodised Gold
Tokyo UPVC Door Handles, 48mm centre, 160mm screws, Lever/Lever in White
UPVC Door Handles, 92mm Centres, 215mm Screws, Lever/Lever in White - Birmingham Handles, Long Screw Centres
